High Quality Wooden Flush Doors Manufacturers in India

Flush doors are similar to normal looking doors but are created with a better technique and insulation factor. They are generally made with strong timber frame which is hollow from inside and is covered with plywood or other strong wooden material on top and sides by Flush Door Manufacturers.

The hollow part of these doors can be manipulated according to the needs of the industry and clients; they can be filled with materials that help in insulation from heat, cold and are water resistant. For the purpose of sound proofing the rooms, they can also be filled with mineral wool and loosely packed fiber materials.

Modak Ply is among the top Flush Door Manufacturers in India and provides their clients with high quality and easily maintainable Flush Doors. Their products are available with various accessories pre-installed and can also be provided with specific demands of their esteemed customer that they have retained over the years. These doors can be easily installed and maintained with minimum effort. 

Top Block Board Manufacturers in India

Block Boards come under various types of Plywood. Soft and thin wooden strips are put together and bonded with one another with gluing material; these wooden strips are then sandwiched between wooden slices which are known as veneer. Block Board Manufacturers use plywood with more than three or four layers of these veneers to make sturdy Block Boards.

The gluing and sandwiching of the wooden strips is done at proper angles to provide these Block Boards with a fair share of strength. The vertical and horizontal load bearing capability of these boards should be suitable for doors, floor panels and partition walls.

MODAK PLY creates a wide range of these products and make sure that they are termite resistant. They are rated among the top Block Board Manufacturers in India and have an appropriately facilitated warehouse for constructing some of the best designs in the market.

The Block Boards fabricated at their facility are highly sturdy, stable, dimensional accurate, easily maintainable, smooth and shiny surface, proper veneers and most importantly, they are borer and termite resistant after constant chemical treatment.

Best PlyWood for Wooden Furniture and Modular Kitchen Manufacturing

Modak Ply Woods are called upon when there is a need for quality wooden products and furniture in the industry, and now after widening their wings in the market, their products are also available for our own homes. These equipments that they create are available everywhere in the market but the quality with which Modak Ply Wood Manufacturers them is beyond any possible replication. Many creators have tried and failed in that regard.

It takes years of market research and continuous customer retention to get where they are in the market at the moment and everything they are achieving in the wood industry is because of their will to create better with every batch of products. They provide an extensive range of products that are created in Delhi India and other national capital regions which include Bathroom Vanities, Laminated Shutters, Carcass/Kitchen Cabinets, Cup-Boards and Wall Utilities etc.

They not only produce these utility products at their facility but are also known for completely reinventing the Kitchen area of homes and office in Delhi NCR with their effective Modular Kitchens. According to the demand of the market and individual customers, they manufacture these modular kitchens while keeping in mind the specifications set by them. While creating exclusive modular kitchens, they also provide the dedicated team of designers to the clients for making it easier for them to choose a suitable design and materials for their Kitchens.

Listed among the top Plywood Manufacturers in India they are also known for creating plywood that are microbial decay-resistant, thicker, durable, manufactured by undiluted glue. The Veneers used in these plywoods are thinner than the ones used by other manufacturers and are according to the regulations set by IS. To further add to the quality and durability of these plywoods, they are boiling water proof and absorb as less as 5% of water that they are exposed to.

Block Board Manufacturers in India are used to creating products without the proper authorization of the concerned industries and the entire block board cores are more often than not consists of irregular shaped wooden places which are not placed end to end. Although, externally all the products look the same, but the ones manufactured by Modak PlyWoods have their own internal materialistic quality attached with them. And this is possibly the main reason why they are so highly appreciated in the market. 

Best Block Board Brands in India

Most of the bigger plywood companies in India, also manufacture block boards.

Here's a list of some of the blockboard manufacturers in India.

Century Ply - Manufactures block boards in both the MR and BWP grades.

Kitply - It's block boards are branded as Kit board, Kit board Gold, Swastika Commercial MR grade.

Greenply - Makes block boards in both internal and external grades.

MODAK PLY are also several other reputed plywood and Block Board Manufacturers in India, other than the ones listed above.

In India, block boards are usually available in two different grades.

1. Interior MR grade

2. BWP Exterior grade.

Interior MR grade block boards are moisture resistant, but cannot be said to be waterproof. The BWP (Boiling Water Proof) exterior grade block boards on the other hand, are of waterproof grade, and are suitable for interior as well as exterior use.

The Indian Standards quality specification for block boards in detailed in document IS: 1659

When to choose block board over plywood?

Block boards are the preferred choice of material for any furniture that requires lengthy pieces of board. For example the doors of wardrobes, shelves of a book-shelf, and any such pieces of wood longer than 7 feet are usually made using block board instead of plywood.

The reason for this is that lengthy pieces of plywood are likely to bend at the center, while the different composition of the block board makes it is much better in this regard. However for shorter length pieces, plywood is better.

Best Plywood for Making Home Furniture’s

For plywood furniture that will be kept indoors, the important point to consider is whether the wood is likely to get exposed to water. For example a dining table kept in the kitchen or dining hall, or kitchen cabinet doors, is likely to be get wet. In such cases the best type of plywood to use will be exterior 'BWR grade' plywood. BWR stands for boiling water resistant. Sometimes it is also referred to as BWP (Boiling water proof). BWR/BWP grades are marked on the plywood sheets, so that they can be identified.

Best Plywood Manufacturers in India offer a better quality of plywood available for exterior use, which is called Marine grade plywood. It is more expensive and usually used in industrial applications, and for use in boats and ships. Marine grade plywood is usually not used in home furniture, and BWR/BWP grades are usually considered adequately water-proof and good enough for this.

For example beds, bedroom cabinets, wall panels etc., interior grade MR type of plywood is suitable. MR stands for moisture resistant plywood. Note that moisture resistant is not the same as water-proof. It only means that this type of plywood can ably withstand some amount of moisture or dampness. MR grade ply is cheaper than BWR grade plywood, and quite suitable for most types of indoor furniture.

When shopkeepers or carpenters say interior plywood they usually mean to say MR grade, and exterior grade usually equates to BWR/BWP grade. As the names suggest interior grade is most suited for indoor use, and exterior grades are often used for outdoor furniture that can be kept outdoors in the garden, terrace or balcony.

The plywood and laminates market in India, is largely dominated by the so-called unorganized sector and locally made plywood is readily available in most places. A short visit to a nearby plywood shop confirms this scenario. The names written on many of the plywood boards are unheard of, and if you try to find information about Flush Door Manufacturers online, in most cases none exists.

Having said that, most shops also sell plywood of well-known brands such as Century and Kitply. In the Indian plywood market, quality branded products cost much more then there lesser known counterparts, and which type to select is for you as a customer to decide based on your preferences. The furniture business (and consequently the plywood and laminates business) is quite dominated by the choices made by carpenters and dealers, since it is the carpenters who usually select and buy plywood on the customers behalf and regularly deal with the shopkeepers.

Next to selecting the correct type (grade) of plywood for making your furniture, from the best Block Board Manufacturers in India, it is also equally important that you buy sheets of the right thickness. The ideal plywood thickness varies based on what type of furniture is being constructed, and hence carpenters who are making the piece are in a better position to advise about this aspect. As customers what we have to be aware of is that thicker plywood equates to greater strength and also to increased costs.

Plywood sheets having genuine ISI mark can be assumed to be of better quality, as the mark implies that these sheets meet the quality specifications set by BIS (Bureau of Indian Standards). For MR and BWR grades of plywood, the Indian Standards specification number is IS:303.

When looking for the ISI mark, Top Plywood Companies and Brands in India you should check whether the specification number IS:303 is printed above the mark, and also the CM/L number (Licence number) should be printed below the mark. If the CM/L number is missing, then the mark could be a fake.

Hardwood plywood made from hardwood timber is stronger and more durable compared to softwood. Good quality plywood sheets are usually made from 100% hardwood (meaning all the individual veneers that make up the plywood have been made from hardwood).

Amongst the alternatives to plywood that are available these days are other engineered wood products such as MDF (Medium density fiber boards), and particle boards. These are cheaper options but not as durable as plywood. Moreover when it comes to makiing custom-made furniture, carpenters usually work only with plywood and not with MDF/Particle boards.